Installation guide

4-122 Motorola RF Switch System Reference Guide
4. The Properties section displays the following information:
5. The Radio Rescuer Settings section allows you to configure the following radio rescuer settings and
information:
6. The Advanced Properties section contains the following configurable items:
Description Displays a description of the Radio. Modify the description as required to name
the radio by its intended coverage area or function.
MAC Address Displays the Media Access Control (MAC) Address of the selected AP.
AP Name Displays the name assigned to the AP. The AP name can be configured on the
Access Port Radios Configuration page.
AP Type Displays the type of Access Port detected. The switches support Motorola AP 100,
AP300 model Access Ports and AP-4131, AP-5131 and AP-7131 model Access
Points.
Radio Type Displays the radio type of the corresponding APs. Available type include:
• 802.11a
• 802.11an
• 802.11b
• 802.11bg
• 802.11bgn
AP Location Displays the current location for the selected AP. The location can be configured
on the Access Port Radios Configuration page.
Available Radios Displays a list of radios available to be used as rescuer radios.
Rescuer Radios Displays a list of radios that have been configured as Rescuer Radios.
Add Click the Add button to add a selected radio or radios from the Available Radios
list into the Rescuer Radios list.
Remove Click the Remove button to remove a selected radio or radios from the Recuer
Radios list.
Rescuer MAC Displays the Media Access Control (MAC) Address of the selected Rescuer Radio.
AP Name Displays the configured AP Name for the selected Rescuer Radio.
AP Location Displays the configured AP Location for the selected Rescuer Radio.The location
can be configured on the Access Port Radios Configuration page.
Rescuer Power Displays the current power level of the selected Rescuer Radio.
Rescuer Attenuation Displays the current Attenuation power for the selected Rescuer Radio.
Antenna Gain Specify the desired antenna gain in dBi for the selected radio.
Coverage Rate Specify the desired coverage rate for the selected radio from the drop-down menu
options.
Lock Detector Enable or disable radio detector mode lock for the selected radio.
Lock TX Power Check this box to lock the TX power for the selected radio.