Installation guide

Network Setup 4-121
6. The Neighbor Details section allows you to select detected neighbor radios and view the following
information:
4.7.9.4 Editing Smart RF Radio Settings
To edit Smart RF radio settings:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Smart RF tab.
3. Select a radio from the table and click the Edit button.
The radio settings are divided into the following three sections:
• Properties
• Radio Rescuer Settings
• Advanced Properties
Radio Type Displays the radio type of the corresponding APs. Available type are:
• 802.11a
• 802.11an
• 802.11b
• 802.11bg
• 802.11bgn
AP Location Displays the current location for the selected AP. The location can be configured
on the Access Port Radios Configuration page.
MAC Address Displays the Media Access Control (MAC) Address of the selected AP.
AP Type Displays the type of Access Port detected. The switches support Motorola AP 100,
AP300 model Access Ports and AP-4131, AP-5131 and AP-7131 model Access
Points.
Radio Type Displays the radio type of the corresponding APs. Available type are:
• 802.11a
• 802.11an
• 802.11b
• 802.11bg
• 802.11bgn
AP Name Displays the name assigned to the AP. The AP name can be configured on the
Access Port Radios Configuration page.
AP Location Displays the current location for the selected AP. The location can be configured
on the Access Port Radios Configuration page.
tx/rx dbm Displays the transmit, receive and attenuation information of the selected
neighbor radio.