Installation guide

Network Setup 4-113
7. Enter a value between 0 and 15 for the Extended Contention Window maximum (ECW Max) value.
The ECW Max is combined with the ECW Min to make the Contention Window. From this range, a
random number is selected for the back off mechanism. Lower values are used for higher priority (video
or voice) traffic.
8. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10.Click Cancel to close the dialog without committing updates to the running configuration.
4.7.5 Configuring Access Point Radio Bandwidth
Refer to the Bandwidth tab to view the QoS weight associated with each radio when added to a WLAN.
The weight represents the switch priority assigned to the traffic transmitted from the radio for the WLAN.
For information on revising the weight assigned to each radio in respect to its intended operation within its
assigned WLAN, see Editing the WLAN Configuration on page 4-26.
To view existing radio bandwidth weight settings:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Bandwidth tab.
Bandwidth information displays per radio with the following data:
Index The Index is the numerical index (device identifier) used with the device radio. Use
this index (along with the radio name) to differentiate the radio from other device
radios.