Installation guide

4-98 Motorola RF Switch System Reference Guide
17.In most cases, the default settings for the Advanced Properties are sufficient. If needed, additional
Advanced Properties can be modified for the following:
Antenna Diversity Use the drop-down menu to configure the Antenna Diversity settings for Access
Ports using external antennas. Options include:
• Full Diversity - Utilizes both antennas to provide antenna diversity.
• Primary Only - Enables only the primary antenna.
• Secondary Only - Enables only the secondary antenna.
Antenna Diversity should only be enabled if the Access Port has two matching
external antennas. Default value is Full Diversity.
Maximum MUs Sets the maximum number of MUs that can associate to a radio. The maximum
number of MUs that can associate to a radio is 64.
Adoption Preference
ID
Displays the preference ID of the switch.The value can be set between 1 and 65535.
To define the radios as preferred, the Access Port preference ID should be same as
adoption preference ID.
The adoption preference ID is used for AP load-balancing. A switch will
preferentially adopt APs which have the same adoption-preference-ID as the
switch itself.
Short Preambles only If using an 802.11bg radio, select this checkbox for the radio to transmit using a
short preamble. Short preambles improve throughput. However, some devices
(SpectraLink phones) require long preambles. This checkbox does not display if
using an 802.11a radio.