Installation guide

Network Setup 4-91
• Configuring Access Point Radio Bandwidth
• Configuring Radio Groups for MU Load Balancing
• Viewing Active Calls (VCAC) Statistics
• Viewing Mesh Statistics
• Smart RF
• Voice Statistics
4.7.1 Configuring Access Port Radios
Refer to the Configuration tab to view existing radio configurations available to the switch. After reviewing
the radios listed, you have the option of editing a radio’s properties, deleting a radio, adding a new radio,
resetting a radio, scanning available channels or exporting a radio.
To view Access Port Radio configuration details:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Configuration tab.
3. Refer to the table for the following information:
Index Displays the numerical index (device identifier) used with the device radio. Use
this index (along with the radio name) to differentiate the radio from other device
radios.
Description Displays a user assigned name for the radio.
AP Type Displays the type of Access Port detected. The switches support Motorola AP 100,
AP300 model Access Ports and AP-4131, AP-5131 and AP-7131 model Access
Points.
Type Use the Type to identify whether the radio is 802.11a radio or an 802.11bg radio.