Installation guide

Network Setup 4-87
6. Click the Details button to launch a screen with additional information about the selected MU. For more
information, see Viewing MU Statistics in Detail on page 4-87.
7. Click the Graph button to launch a graph with pictorial information about the selected MU in a graphical
format. For more information, see View a MU Statistics Graph on page 4-88.
8. Click the Export button to export the content of the table to a Comma Separated Values file (CSV).
4.6.3.1 Viewing MU Statistics in Detail
The MU Statistics Details screen displays additional device address and performance information for the
selected MU. Use the WMM information to assess if poor MU performance can be attributed to an
inaccurate WMM setting for the type of data transmitted. To view the MU Statistics details:
1. Select a Network > Mobile Units from the main menu tree.
2. Click the Statistics tab.
3. Select a MU from the table displayed in the Statistics screen and click the Details button.
The Details screen displays WLAN statistics for the selected WLAN, including:
• Information
• Traffic
• RF Status
• Errors
Information in black represents the statistics from the last 30 seconds and information in blue represents
statistics from the last hour. Use both sets of data to trend stats in real time versus a measurable period
(1 hour).
4. Refer to the Information field for the following information:
WLAN Displays the name of the WLAN the MU is currently associated with. Use this
information to determine if the MU/WLAN placement best suits the intended
operation and MU coverage area.
Throughput Mbps Displays the average throughput in Mbps between the selected MU and the
Access Port. The Rx column displays the average throughput in Mbps for packets
received on the selected MU from the Access Port. The Tx column displays the
average throughput for packets sent on the selected MU from the Access Port.
Bit Speed (Avg.)
Mpbs
Displays the average bit speed in Mbps for the selected MU. This includes all
packets sent and received.
% Non Unicast Displays the percentage of the total packets for the selected MU that are non-
unicast packets. Non-unicast packets include broadcast and multicast packets.
Retries Displays the average number of retries per packet. A high number in this field
could indicate possible network or hardware problems.
MAC Address Displays the Hardware or Media Access Control (MAC) address for the MU. This
address is hard-coded at the factory and cannot be modified.
BSS Address Displays the MU’s BSSID.
IP Address Displays the current IP address for the MU.