Installation guide

4-74 Motorola RF Switch System Reference Guide
4. Enter the Host Name for the device you wish to add.
5. Enter a valid MAC Address of the device you wish to add.
6. Optionally, enter the MAC Mask for the device you wish to add.
7. Refer to the Status field. It displays the current state of the requests made from the applet. Requests are
any “SET/GET” operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
8. Click OK to save and add the new configuration and close the dialog window.
9. Click Cancel to close the dialog without committing updates to the running configuration.
4.5.4.3 Mapping Include List Items to WLANs
To assign include list items to a one or more WLANs:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Include tab to view NAC Included devices.
3. Select an item from the Include List’s List Name field and click the Edit button (within the Configured
WLANs field).
4. Map the selected list item with as many WLANs as needed (be selecting the WLAN’s checkbox). Use the
Select All button to associate each WLAN with the selected list item.
5. To remove the WLAN Mappings, select the Deselect All button to clear the mappings.
6. Refer to the Status field for a display of the current state of the requests made from the applet. Requests
are any “SET/GET” operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
7. Click OK to save and add the new configuration and close the dialog window.
8. Click Cancel to close the dialog without committing updates to the running configuration.