Installation guide

4-72 Motorola RF Switch System Reference Guide
• Conduct a NAC check for MU's connecting to the WLAN as well as perform an additional exclude
function, by attaching an exclude list to the WLAN.
• Do not perform NAC validation for MUs connecting to the WLAN.
• Include a few MU’s for NAC validation and bypass the rest of the MU’s.
To view the attributes of a NAC Include list:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Include List Configuration tab to view and configure NAC enabled devices.
3. The Include Lists field displays the list of devices that can be included on a WLAN (a printer for
example).
Use the Add button to add a device for configuration on a WLAN. A maximum of 6 MAC addressees are
allowed per device. For more information, see Adding an Include List to a WLAN on page 4-73.
The List Configuration field displays a list of MAC addresses that can be included on a WLAN. You can
add more than one device in this list. For example, printer 1, printer 2 etc.
4. Use the Add button (within the List Configuration field) to add more than one device to the WLAN. You
can create 32 lists (both include and exclude combined together) and 64 MAC entries per list. For more
information, see Configuring Devices on the Include List on page 4-73.
5. The Configured WLANs field displays available WLANs. Associate a list item (within the Include Lists
field) with as many WLANs as required.
For information on mapping NAC Include list items with WLANs, see Mapping Include List Items to
WLANs on page 4-74.
6. To delete a device (and its configuration), select it from the Include Lists and click the Delete button
7. Use the Edit button in the List Configuration section to modify the devices parameters.