Installation guide

Network Setup 4-67
rate, then perhaps the switch is not adequately positioned or configured to support the MUs within that
WLAN.
5. Refer to the Retry Counts field to review the number packets requiring retransmission from the switch.
6. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
7. Click Refresh to update the Packet Rate and Retry Count data displayed within the screen.
8. Click Close to close the dialog and re turn to the Network > Wireless LANs > Statistics screen.
4.5.3 Configuring WMM
Use the WMM tab to review a WLAN’s current index (numerical identifier), SSID, description, current
enabled/disabled designation, and Access Category.
To view existing WMM Settings:
1. Select Network > Wireless LANs from the main menu tree.
2. Click the WMM tab.
The WMM tab displays the following information:
NOTE: The Motorola RF Management Software is recommended to plan the deployment
of the switch. Motorola RFMS can help optimize the positioning and configuration of a
switch in respect to a WLAN’s MU throughput requirements. For more information, refer
to the Motorola Web site.
Idx Displays the WLANs numerical identifier. This field is displayed in a two part
format. The first number is the WLAN index and the second number is a sub-index
corresponding to the access category. Click the Edit button to modify this property.
SSID Displays the Service Set ID (SSID) associated with each WLAN.