Installation guide

4-50 Motorola RF Switch System Reference Guide
The Radius Configuration screen contains tabs for defining both the Radius and NAC server settings. For
NAC overview and configuration information, see Configuring NAC Server Support on page 4-53.
6. Refer to the Server field and define the following credentials for a primary and secondary Radius server.
RADIUS Server
Address
Enter the IP address of the primary and secondary server acting as the Radius user
authentication data source.
RADIUS Port Enter the TCP/IP port number for the primary and secondary server acting as the
Radius user authentication data source. The default port is 1812.
RADIUS Shared
Secret
Provide a shared secret (password) for user credential authentication with the
primary or secondary Radius server.
Server Timeout Enter a value (between 1 and 300 seconds) to indicate the number of elapsed
seconds causing the switch to time out on a request to the primary or secondary
server.