Installation guide

4-32 Motorola RF Switch System Reference Guide
6. Configure the Multiple VLAN Mapping for WLAN table as required to add or remove multiple VLANS
for the selected WLAN.
Multiple VLAN’s per WLAN are mapped (by default) to a regular VLAN and are not supported on an
adaptive AP. Refer to Editing the WLAN Configuration on page 4-26 to select and define an independent
VLAN for adaptive AP support
7. Select the Insert button to add the VLAN using the criteria described above.
8. Select a row from the Multiple VLAN Mapping table and click the Remove button to delete the mapping
of a VLAN to a WLAN.
9. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel to close the dialog without committing updates to the running configuration.
VLAN Displays the VLANs currently mapped to the WLAN. By default, VLAN 1 is
configured for any selected WLAN.
User Limit Displays the user limit configured for the mapped VLAN. The maximum allowed
user limit is 4096 per VLAN.
NOTE: In a cluster environment with multiple switches, please ensure that the VLAN list
is consistent across all switches.