Installation guide

4-18 Motorola RF Switch System Reference Guide
8. Use the Secondary IP Addresses field to define/modify additional IP addresses to associate with
VLAN IDs. The addresses provided will be used if the primary IP address is unreachable.
Select the Add button (within the Secondary IP Addresses field) to define/modify additional addresses
from a sub screen. Select an existing secondary address and select Edit or Delete to revise or remove a
secondary address as needed.
9. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel to close the dialog without committing updates to the running configuration.
4.4.2 Viewing Virtual Interface Statistics
The Statistics screen displays information about packet level statistics and errors at the interface.
To view virtual interface statistics:
1. Select Network > Switch Virtual Interface from the main tree menu.
2. Select the Statistics tab.
Refer to the following to assess the network throughput of existing virtual interfaces:
Name Displays the user defined interface name. The corresponding statistics are
displayed along the row. The statistics are the total traffic to the interface since
its creation.
Bytes In Displays the number of bytes coming into the interface. The status is not self-
updated. To view the current status, click the Details button.
Packets In Displays the number of packets coming into the interface (including packets
dropped, error packets, etc.)