Installation guide

RFS4010 RF Switch: Installation Guide
12
4.2 Gigabit Ethernet on the RFS4010 RF Switch
The RFS4010 RF Switch has five RJ-45 Gigabit Ethernet ports and one 1 combo Gigabit (RJ45 + SFP)
uplink port. Using the RJ-45 ports requires connecting a Category-6 Ethernet cable to the port. To use
the Gigabit SFP port, first install the SFP Module (Motorola Part Number: Fiber-3000-1S-WWR).
4.2.1 Installing Gigabit Ethernet SFPs
1. Open the bail on the transceiver.
2. Insert the SFP transceiver into the corresponding port on the switch.
Open bail to insert or remove
SFP transceiver