user manual

96
Power Select
(4)
No No Yes Yes
High Power
(Model
dependant)
Use CPS for selecting the transmission power level
you want for each channel. Power level default
depends on maximum power the radio supports.
Note: There may be power restrictions depending
on the frequency chosen in each channel.
Power up Text No N/A Yes N/A MOTOROLA
Text that shows up in the radio display when turned
ON. Default text is MOTOROLA. Programmable via
CPS.
Repeater/
Talkaround (3)
No No Yes Yes OFF
Available only for RDU4160d model.
Reset to
Factory
Defaults (2)
Yes Yes Ye s Yes Enabled
Allows to restore radio's factory defaults. Press PTT,
SB1, SB2 simultaneously for 3 seconds while
turning ON radio.
Reverse Burst No No Ye s Yes 180
Reverse Burst eliminates unwanted noise (squelch
tail) during loss of carrier detection. Use CPS to
select values 180 or 240.
Features
Programmable Via
RADIO PANEL
Programmable via
CPS
Default Value Programming Tips
Display
Non-
Display
Display
Non-
Display