user manual

PROGRAMMING
FEATURES
English
52
NUISANCE CHANNEL DELETE
Nuisance Channel Delete allows you to
temporarily remove channels from the ‘Scan
List’. This feature is useful when irrelevant
conversations on a ‘nuisance’ channel tie up
your radio's scanning features. To delete a
channel from the scan list:
• Start ‘Scan Mode’ by short pressing the SB2
button (*)
• Wait until the radio stops on the channel you
wish to eliminate, then long press the SB2
button to delete it.
• The channel will be removed until you exit
‘Scan Mode’ by pressing the SB2 button again
or if radio is turned OFF.
Note: (*)Assumes the SB2 button is not
programmed to another function different
from the default.