Installation manual

Diagnostics
B
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual 70
574702-001 a This document is uncontrolled pending incorporation in a Motorola CMS
d16 Connected Home
This diagnostic displays the MoCA network status:
CONNECTED HOME STATUS
RF Freq: 1150 MHz
MoCA Node/ Set-top
Node
Dev (#Ses)/
Ver
MAC/IP
-/1 M ETerm (0)
02.51
xx:xx:xx:xx:xx:xx
169.254.001.xxx
-/2 EHub (2)
02.51
xx:xx:xx:xx:xx:xx
169.254.001.xxx
-/3 ETerm (1)
02.51
xx:xx:xx:xx:xx:xx
169.254.001.xxx
-/4 ETerm (0)
02.51
xx:xx:xx:xx:xx:xx
169.254.001.xxx
3/5 ETerm (0)
02.51
xx:xx:xx:xx:xx:xx
169.254.001.xxx
0/- ETerm (0)
02.51
xx:xx:xx:xx:xx:xx
169.254.001.002
The Connected Home Status fields are:
Field Description
RF Freq Displays the frequency of the MoCA RF channel in use by the set-top, in
MHz, from 1150 to 1500 MHz. The default is 1150 MHz.
Table Displays data from each detected MoCA set-top:
• * — Indicates the set-top on which you are viewing the diagnostic
• N — Indicates the MoCA network coordinator.
• M — Indicates the master set-top.
The columns are:
• MoCA Node/Set-top Node — Displays the MoCA node ID, which can be
0 to 8.
• Dev — ETerm indicates a media terminal. EHub indicates a media hub.
• (#Ses) — The Number actually shown on the screen is actually the number
of sessions on the Hub's hard drive.
a. There is always one session on a working hard drive. This session
supports the pause function.
b. There are 0 or 1 additional sessions, depending if the Hub is recording
something or not.
c. There is 1 more session if the Hub user is playing back a recorded
session on the hub itself.
d. There are 1 or two sessions if terminal(s) are playing MRDRV sessions.
Ver — Displays the MoCA software version in xx.yy format (for example,
02.51).
MAC/IP — Displays the MAC address and the link-local IP address
169.254.001.xxx; xxx ranges from 0 to 255.