Installation manual

Diagnostics
B
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual 69
574702-001 a This document is uncontrolled pending incorporation in a Motorola CMS
Field Description
connection to MAC PID Stream.
I dc INIT_WAIT_DC_OR_C The QIP7000 series is in the interactive
initialization state and waiting for the
default configuration or the contention
channel list messages.
I L WAIT_LM_ACK The QIP7000 series is in the interactive
initialization state and waiting for Link
Management Response ACK for Local
Address Message.
I SO WAIT_SO_ACK The QIP7000 series is in the interactive
initialization state and waiting for a Sign On
acknowledgement.
I LA WAIT_LA_OR_SO The QIP7000 series is in the interactive
initialization state and waiting for Logical
Address or Sign On with verification
Frequency message.
S I INIT_STOPPED The QIP7000 series is in the interactive
initialization state and the TransMode has
stopped.
r dc RUN_WAIT_DC_OR_C The QIP7000 series is in the interactive
state and waiting for the default
configuration or the contention channel list
messages.
r RUNNING Interactive state is running, sending idle
messages, and waiting for any prepare for
poll or MAC messages.
S RUN_STOPPED The interactive run state has stopped and
the QIP7000 series is waiting for status or
a transmission control message.
00 INVALID The interactive state is unknown or invalid.
MAC Abort Cntr This counter increments every time the MAC layer reaches the cell abort count
limit. It is reset when the QIP7000 series receives an ACK. If the counter
reaches the MAC abort count limit, the QIP7000 series assumes the MAC layer
is unavailable due to noise, congestion, or some other problem. The QIP7000
series stops transmitting data, reports an error to the calling function, and
attempts to re-enter the network using the initialization process. 0000 is
displayed as the default or if the MAC Abort CNTR is not configured or
unknown.
Socket Port
State
The socket mode and activity:
• UNUSED — The socket is not being used.
• OPENED — The socket is open.
• READY — The socket is ready to send or receive.
• RECEIVING — The socket is receiving data from the application server.
• SENDING — The socket is sending data to the application server.
• UNKNOWN — The socket state is invalid or unknown.