Installation manual

Diagnostics
B
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual 68
574702-001 a This document is uncontrolled pending incorporation in a Motorola CMS
d15 Interactive Status
This diagnostic describes the interactive information that is displayed only when Thin
Client platform is running. The information on the OSD and front panel is updated at least
once every 5 seconds while the diagnostic is displayed. This is an example of a code
module display with status descriptions:
Figure 30 – Interactive status front panel display
The Interactive Status fields are:
Field Description
IP Address The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC
1500 to the QIP7000 series. 0.0.0.0 is displayed if the IP address is not
configured or unknown.
Downstream ID A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the
QIP7000 series. 0000 is displayed if the Downstream ID is not configured or if
it is unknown.
State The interactive status of the QIP7000 series:
Front
panel
OSD Description
U UNCONFIG The QIP7000 series is not configured for
the interactive system, and the platform
should run as pre-interactive.
C MAC_CONNECT The QIP7000 series is waiting to establish