Installation manual

Diagnostics

QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual 55

574702-001 a This document is uncontrolled pending incorporation in a Motorola CMS

The Code Modules fields are:

Field Description

Boot Code The boot code version in ASCII format.

Version The firmware version and build date in ASCII format.

Digital Secure

Processor

The digital secure processor version in ASCII format (N/A is indicated if the

platform does not detect a digital secure processor).

Downloadable

Object Information

Table

Lists all objects loaded, or being loaded, onto the QIP7000 series in ASCII format. The

information displayed for each object depends on the running environment. If a

download is not in progress, the front panel displays the currently running environment

and version number, as shown in Figure 4-9. On the front panel, “bPC” represents Thin

Client code.

Object The object name.

Ver The object version.

Status The object status, updated on the OSD and front panel display every 5 seconds while

you display the diagnostic:

OSD Status Description

MEM ALLOC Allocated Memory for object is allocated

LOADING Loading Object is being loaded

STARTING Enabling Object is being started (the

constructor is running)

ENABLED Enabled Object is running

ENA–NOT RUN Enabled_Not_ Runnable Object is enabled, but cannot run

STOPPING Disabling Object is being stopped (the

destructor is running)

DISABLED Disabled Object has been disabled

DIS-NOT RUN Disabled_Not_ Runnable Object is disabled and cannot run

DELETING Deleting Object is being deleted

POSTPONED Postponed Object cannot run on the current

system; it will be enabled during the

next boot

CONNECTED Connect Connected to download PID —

awaiting data

PEND CONNECT TryingToConnect Trying to connect

ID The object identifier.