Installation manual

Diagnostics
B
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual 47
574702-001 a This document is uncontrolled pending incorporation in a Motorola CMS
The Separable Security fields are:
Field Description
CARD Interface CableCARD Interface is a status indication of the interface between the QIP and
CableCARD. It will indicate ‘Good’ if no errors were detected, ‘Error’ if there is a
problem detected with establishing the CableCARD interface, or ‘Unsupported
CARD’ if the inserted CableCARD is not an M-Card.
CableCARD ID The unique identifier provided by the CableCARD.
Host ID The unique identifier in the QIP Device Certificate.
Data ID A value generated by the CableCARD for the Pairing report.
Validation • UKNOWN if a Validation message was not received by the product
• VALID or INVALID as set by the Host Validation Message received from the
headend
• BINDING if the CableCARD is busy with the binding authentication process
• NOT BOUND if Card validation status in not bound for CableCARD reasons
• HOST CERTIFICATE INVALID if the status is not bound because the Host
Certificate was invalid
• HOST SIGN FAILED if status is not bound because of failure to verify Host’s
SIGN
• AUTH KEY FAILED if status is not bound because of failure to match AuthKey
from the Host Device
• FAILED if binding failed for other reasons
Pairing Rpt Method Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or set to
‘Unknown’ if the headend message was not received.
MSO Phone Number MSO Phone Number as configured at the headend.
CableCARD
Object Name Code object name executing on the CableCARD.
Object Ver. Code object version executing on the CableCARD.
Manufacturer CableCARD manufacturer.
HW Version Version number provided by the CableCARD.