Installation manual

Diagnostics
B
QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual 46
574702-001 a This document is uncontrolled pending incorporation in a Motorola CMS
The Unit Address fields are:
Field Description
TvPC Installed Indicates whether the TvPC renewable security system is installed:
NO — TvPC is not installed (Note: the QIP7000 series does not include a TvPC slot)
CableCARD
Inserted
YES — CableCARD is inserted
NO — CableCARD is not inserted
Unit Address A unique decimal number that indicates the unit address or physical address.
OOB Addresses
Network The QIP7000 series network address displayed in decimal format.
Multicast 16
Address
Specifies the stream to which the OOB multicast 16 addresses are assigned. The stream
type and multicast 16 addresses cycle on the OSD every 5 seconds. The valid stream types
are:
• Net — Network
• EMM — EMM
• SCC — SCC_ECM
• Dnld — Download
• Data — Data
• Poll — Polling packet identifier (PID)
The 16-bit multicast address is displayed in 4-byte hexadecimal format. The Multicast 16
addressed messages filter on a 16-bit multicast address. The user processor can define up
to four multicast addresses in hardware, and any message matching one of the four is
processed. Messages not matching the multicast address are discarded.
Serial Number The Host Serial Number is displayed on the Unit Address diagnostic screen.
MAC
Addresses
The MoCA, Ethernet, 1394, USB, and MAC addresses are stored in protected flash and
displayed in hexadecimal.
Separable Security
This diagnostic displays information on the inserted M-CARD and CableCARD Interface
with the QIP.