027B25TOCA.
1027B25TOCA.FRA Page ii Thursday, December 5, 1996 11:00 Contents Page ADVISOR® Pro FLX Pager .........................................1 Getting The Most From Your ADVISOR Pro FLX Pager ...................................................................1 Display Symbols .........................................................2 Controls ......................................................................2 ADVISOR Pro FLX Pager Symbols.............................3 Turning The ADVISOR Pro FLX Pager On....
1027B25A.FRA Page 1 Thursday, December 5, 1996 10:59 ADVISOR Pro FLX Pager Congratulations on purchasing an ADVISOR Pro FLX pager. Your ADVISOR Pro FLX pager utilizes the latest in paging − the FLEX TECHNOLOGY. This technological advancement extends battery life up to three times longer than ordinary pagers, saving you time and money. As a Motorola FLEX pager user, you can feel more confident in receiving your pages because FLEX technology improves the ability to receive pages.
1027B25A.
1027B25A.
1027B25A.FRA Page 4 Thursday, December 5, 1996 10:59 Other Symbols: å Enter Auto On/Off Menu and Auto On/Off Enabled õ Auto On/Off Disabled ô 24 Hour Time AM AM Time PM PM Time à Disable Alarm À Enable Alarm Ì Low Battery Indicator ö Out-Of-Range Ü Message Continuation à Press Right Arrow Button Prompt <..> Alphanumeric Missing Fragment Indicator ____ Long Numeric Missing Fragment Indicator Turning The ADVISOR Pro FLX Pager On Press Ë. Your pager alerts and shows ëon the left of the display.
1027B25A.FRA Page 5 Thursday, December 5, 1996 10:59 Receiving And Reading Messages When a message is received, your pager alerts and displays a flashing Message ü symbol. ➊ Press any button to stop the alert. ➋ Press Ë to display your message. Your pager automatically stores the message and the time and date it is received. The flashing arrow Ü at the bottom right corner of the screen indicates the message you are reading continues beyond the first two lines of the display.
1027B25A.FRA Page 6 Thursday, December 5, 1996 10:59 You can now press ä or ã to move the cursor within the function menu. To activate your function selection, press Á. NOTE: To exit from any menu without making changes, press Ë. Backlighting You can activate or deactivate the pager’s backlight at any time by pressing and holding Á for 1.5 seconds. If no other buttons are pressed, the backlight automatically turns off when the display returns to the standby mode.
1027B25A.FRA Page 7 Thursday, December 5, 1996 10:59 ➍ Press ä to increment the hour digit. This button is identified by the + symbol. ➎ Press ã to move the cursor to the minute digits. ➏ Press ä to increment the minute digits. ➐ Repeat the process for each set of digits: AM/PM/ 24 hr., month/day/year. ➑ Press Á to activate the time and date changes.
27B25A.FRA Page 8 Thursday, December 5, 1996 10:59 ➍ Press ä to toggle between À orÃ. À + 12:23PM à Example of Set Alarm Screen ➎ Press ã to move the cursor to the hour digit. ➏ Press ä to increment the hour digit. ➐ Repeat the process for each entry (minute, and AM/ PM). ➑ Press Á to activate your selection. The Alarm Ö symbol is shown on the display if an alarm is set. At the selected time, your pager either vibrates or emits a 8-second alert, depending on the pager’s alert mode.
1027B25A.FRA Page 9 Thursday, December 5, 1996 10:59 If the selected mode is audible (É), your pager emits a short chirp. If the selected mode is silent (Œ), and your pager is equipped with a vibrator, your pager vibrates. Setting The Alert Pattern Your pager has a standard alert (1), seven different pleasing alerts (2 through 8) allowing you to select and change the alert. ➊ Press Á to display the function menu. ➋ Press ä to move the cursor to È, then press Á.
1027B25A.FRA Page 10 Thursday, December 5, 1996 10:59 ➎ Press Á to delete the message. If your pager is equipped with the Delete All feature and you want to delete all unlocked messages from memory: ➊ Press Á to display the function menu. ➋ Press ã to move the cursor to ñ . ➌ Press Á twice. All unlocked messages are now deleted. Setting Auto On/Off If your pager is equipped with the Auto On/Off feature and you want to activate it, proceed as follows: ➊ Press Á to display the function menu.
1027B25A.FRA Page 11 Thursday, December 5, 1996 10:59 ➑ Press Á to activate auto on/off. The indicator Î is displayed in the upper left-hand corner of the display if the auto on/off function is enabled. If the on time is equal to the off time, the pager does not enable the auto on/off function. Other Features Low Battery Indicator: A low battery Ì symbol is displayed at the onset of a low battery condition.
1027B25A.FRA Page 12 Thursday, December 5, 1996 10:59 Battery Information NOTE: The battery door is hinged and does not need to be removed. Your ADVISOR Pro FLX pager is designed to operate with a single AAA-size alkaline battery (carbon zinc batteries are not recommended). See the diagram for the battery door location. To install or replace the battery, place the pager face down and proceed as follows: ➊ Unlock the battery door by sliding the door latch away from the battery door.
1027B25A.FRA Page 13 Thursday, December 5, 1996 10:59 NOTE: If the battery is inserted into the pager for the first time or if the pager has been without a battery for a few days, the backup battery inside the pager will take approximately 12 hours to become fully charged. During this time, all pager settings and messages stored and/or locked in memory will be erased if the battery is removed. For questions pertaining to your paging service, contact your respective paging service provider.
1027B25A.FRA Page 14 Thursday, December 5, 1996 10:59 t, Motorola, FLEX, ADVISOR, and are trademarks or registered trademarks of Motorola, Inc. © 1996 by Motorola, Inc. All Rights Reserved. Paging Products Group 1500 Gateway Blvd., Boynton Beach, FL 33426-8292 Printed in U.S.A.
