User's Guide
Table Of Contents
- 1. Safety Instructions
- 2. Getting Started
- 2.1 Baby Unit Power Supply
- 2.2 Parent Unit Battery Installation
- 2.3 Parent Unit Power Supply
- 3. Using the Baby Monitor
- 3.1 Setting Up
- 3.2 Power On or Off the Baby Unit
- 3.3 Power On or Off the Parent Unit
- 3.4 Night Vision Mode
- 3.5 Turn off Parent Unit LCD Screen
- 4. Parent Unit Menu Options
- 4.1 Adjust Speaker Volume
- 4.2 LCD Brightness
- 4.3 Set Alarm Time on the Parent Unit
- 4.3.1 Set lullaby
- 4.4 Monitor the Temperature
- 4.4.1 Temperature Format
- 4.4.2 Temperature Range
- 4.4.3 Temperature Alert
- 4.5 Remove a Baby Unit from the Parent Unit
- 4.6 Set Screen Off time for the Parent Unit
- 4.7 Zoom, Pan or Tilt
- 4.8 Pair and Replace a Baby Unit
- 4.9 Multi-Camera Use
- 5. Disposal of the Device (environment)
- 6. Cleaning
- 7. Troubleshooting
- 8. General Information
General Information 27
8
.
Technical Specifications
RF frequency bands
2405 MHz to 2475MHz
Parent unit display
2.8” diagonal TFT LCD
Temperature Operating
range
0°C ~ 40°C or 32°F ~ 104°F
Baby unit image sensor
Color CMOS 0.3M Pixels
Power adaptor for the baby
unit and the parent unit
Input: 100-240V AC, 50/60Hz,
200mA or 300mA;
Output: 5.0V DC, 1000mA
Parent unit battery
information
Lenovo Corporation (BL253)
3.8V, 2000mAh Lithium-Ion
Polymer, rechargeable battery pack
Battery life 7 hours (maximum)
WARNING
Use only with provided power adaptor:
Dongguan Becky Electronics Tech Co., Ltd. (BQ05A-0501000-U)
Input 100-240V AC, 50/60Hz, 300mA;
Output: 5.0V DC, 1000mA
or
Dongguan Everest Industrial Co., Ltd. (EP04-050100WXLZ)
Input : 100-240V AC, 50/60Hz, 200mA;
Output : 5.0V DC, 1000mA
or
ShenZhen Baijunda Electronic Co., Ltd. (AT-538A-050100A)
Input : 100-240V AC, 50/60Hz, 200mA;
Output : 5.0V DC, 1000mA
WARNING
Do not attempt to replace the battery, but
contact customer service if it
needs replacing.
Note
Specifications are subject to change without prior notice.