Quick Start Guide Models: PIP1500 CONNECT PIP1500-2 CONNECT PIP1500-3 CONNECT PIP1500-4 CONNECT
1. At a glance Baby (camera) unit 3 1 6 7 4 5 2 1. Camera 2. Base 3. Speaker 4. Antenna 5. Power jack 6. Power / Linking LED indicator Lights up in blue when the parent unit is powered on and linked to the baby (camera) unit. 7. Pair button Press and hold to pair with the parent unit. Parent unit 9 6 7 8 1. Screen display 2. Dual sound level indications (front and top view) 3. Power button Press and hold to turn on or off. Press to turn the screen on or off. 6.
2. Connect and charge Baby (camera) unit 1. Plug the DC plug of the power adapter into the power socket on the rear of the baby (camera) unit and plug the other end of the AC adapter into the wall socket. 2. The baby unit turns on and the power indicator lights up in blue and flashes in red after 30 seconds if the parent unit has not been powered up. WARNING Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 meter or 3 feet away).
Note Use only the supplied power adapter (DC5V / 1500 mA). Pair the baby (camera) unit to the parent unit We have paired the baby unit to the parent unit in the pack. In case you want on the rear of the baby (camera) to pair an extra camera, press and hold unit until the voice prompt 'Ready for pairing' is heard. 3. Wall mount the baby (camera) unit 2 1 4 1. 3 5 Mark the positions of 2 screw holes on the wall. Drill a screw hole at each marking. 2.
4.
Other menu options Lullabies playback 1. Press MENU on the parent unit to open the menu. then press OK and view the names of 2. Scroll the navigation button to lullabies displaying on the screen. 3. Select a desired lullaby then press OK to start playback. Audio book playback 1. Press MENU on the parent unit to open the menu. then press OK and view the names of 2. Scroll the navigation button to audio books displaying on the screen. 3. Select a desired audio book then press OK to start playback.
5. View the baby through your device Minimum system requirement • Android™ System: Version 7.0 or above • iPhone®/iPad® iOS: Version 10.0 or above • High Speed (Wi-Fi®) Internet: At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.net). Connect to Wi-Fi® and use the Nursery App Camera 1.
6. Help No display • Try recharging the battery pack. • Reset the parent and baby (camera) units. Unplug both units from the wall socket, then plug them back in. • Check if the parent/baby (camera) unit is powered on. • When operated by the battery only, the parent unit display will go blank after 5 minutes, 30 minutes or 60 minutes to save power (depending on video settings).
7. General information Consumer Products and Accessories Warranty Thank you for purchasing this Motorola branded product manufactured under license by Meizhou Guo Wei Electronics Co. LTD., AD1 section, The economy exploitation area, Meizhou, Guangdong, P.R.China .
Products Covered Length of Coverage Consumer Products Two (2) years from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories (battery, power supply(s) and line cords) Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product.
How to Obtain Warranty Service or Other Information? To obtain service or information, please visit us at: motorolanursery.com/support You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a MZGW Authorized Repair Center.
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2022 Motorola Mobility LLC. All rights reserved.
