user manual

http://www.motorola.com/computer/literature IN-3
I
N
D
E
X
J17 (SP4 transmit clock) 1-10
J18 (SP3 transmit clock) 1-12
J20 (SP4 clock receiver buffer) 1-11
J22 (system controller) 1-13
J3 (cache mode) 1-7
jumpers, backplane 1-43
jumpers, setting 1-6, 1-13
K
keyboard/mouse interface 3-8, 4-11
L
L2 cache 1-1, 1-7, 3-1, 3-3
LAN transceiver 1-51, 3-18
LED mezzanine 1-14, 2-4, 3-19, 4-3
local reset (LRST) 2-3, 3-16
lowercase 5-3
M
manufacturers’ documents D-2
memory capacities 3-21
memory map
PCI local bus 2-6, 2-7
memory maps 2-5
memory size 6-10
multiplexing function (P2) 3-15
N
NETboot enable 6-9
Network Auto Boot enable 6-9
Non-Volatile RAM (NVRAM) 6-1, 6-3
O
operating parameters 6-1
P
P2 adapter
for MVME761 1-33
MVME712M 1-24
MVME761 1-32
P2 adapter board 1-14, 1-25, 1-45, 1-49, 3-5,
3-21
P2 multiplexing 1-48
P2 multiplexing function 3-15
parallel port 1-14, 2-13, 3-2, 3-8, 3-9, 3-21,
3-22, 4-23, 4-28
PCI bus 2-4, 2-7, 3-3, 3-7, 3-11, 3-17
PCI expansion 1-1, 1-35, 3-3, 3-7, 3-14, 4-8
PCI-ISA bridge controller (PIB)
functions 3-11
PIB controller 2-10, 3-10
pin assignments, connector 4-1
PMC expansion 3-3
polyswitches (fuses) 1-51, 3-17, 3-18
power distribution 1-51, 3-18
PPCBug 2-1, 3-20
PPCBug debugger firmware 5-1, 6-1
R
RAM200 memory module 3-21
Raven MPU/PCI bus bridge controller ASIC
2-5, 2-10, 2-11, 2-15, 2-16, 3-11,
3-20
real-time clock 3-11
related documentation D-1
related specifications D-5
remote control/status connector 3-13
remote LED
connector 4-7
remote status/control connector 1-14, 4-3
required equipment 1-3
resetting the system 2-3, 2-13, 3-16
restart mode 5-8
RF emissions A-3
ROMboot enable 6-8, 6-11, 6-12
ROMFAL 6-10
ROMNAL 6-11
S
SCSI
cabling 1-45
interface 3-5
termination 3-5
terminator power 1-52, 3-18, 3-19
SCSI bus 6-5