user manual

Configure and Environment Commands
A-12 Installation Guide
A
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default
Master Starting Address #3
Master Ending Address #3
Master Control #3
Master Enable #4 [Y/N]
Master Starting Address #4
Master Ending Address #4
00000000
00000000
00
N
00000000
00000000
Base address of the
VMEbus resource that is
accessible from the local
peripheral bus. If
enabled, the value is
calculated as 1 less than
the calculated size of
memory. If not enabled,
default is $00000000.
Ending address of the
VMEbus resource that is
accessible from the local
peripheral bus. If
enabled, the default is
$00FFFFFF, otherwise
$00000000.
This defines the access
characteristics for the
address space defined
with this master address
decoder. If enabled, the
default is $3D,
otherwise $00.
Do not setup and enable
the Master Address
Decoder #4.
This is the base address
of the VMEbus resource
that is accessible from
the local peripheral bus.
The default is $0.
This is the ending
address of the VMEbus
resource that is
accessible from the local
peripheral bus. The
default is $0.