User's Guide series Personal Communicator Model V100 GSM900/1800 MHz 000622-O
Introduction Your new Personal Communicator provides cool and exciting ways to keep in contact with your family, special friends, and your mates. Just review this user guide carefully and you will be ready to start using your new Personal Communicator. A detachable Quick Reference Card is included with this guide. Personalised Control You can setup your Personal Communicator to access important messages, phone numbers, and features quickly.
• • • • Introduction • 2 Voice Tags lets you add voice activated commands to call your phone book entries. You can also add voice commands to select Quick Access options. The ] button lets you display your book entries quickly. Just one press and you’re there! When your Personal Communicator is closed or in the holster, press } , located on the outside of your Personal Communicator, to answer a call quickly and easily.
Contents Safety ............................................................ 5 Getting Started............................................ 11 Installing the SIM Card and Battery ..............11 Control Buttons .............................................13 The Display ...................................................15 Backlight .......................................................15 Turning On Your V100 Personal Communicator 16 Entering your SIM Card Personal Identification Number (PIN) .............
Setting a Bookmark.......................................36 Internet Service Alerts...................................36 Making and Receiving Calls During a Mobile Internet Session...............36 Ending a Mobile Internet Session .................36 Phone Book ................................................ 37 Voice Dialling ................................................38 Personal Numbers ........................................39 Last Ten Calls ...............................................
Safety Information Your Personal Communicator is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. International agencies have set standards and recommendations for the protection of public exposure to RF electromagnetic energy.
modifications, or attachments could damage the Personal Communicator and may violate local agency regulations. Safety Information Operation 6 Normal Operation - The communicator is designed to be used with a headset for talking and listening. The communicator can also be placed inside the holster, then the holster can be clipped onto your belt, pocket, handbag, or other apparel and used with the headset.
Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Observe the following guidelines when using your Personal Communicator while driving. • Give full attention to driving--driving safely is your first responsibility. • Use hands-free operation, if available. • Pull off the road and park before making or answering a call if driving conditions so require. Electronic Devices Most modern electronic equipment is shielded from RF signals.
Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Safety Information Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Blasting Areas To avoid interfering with blasting operations, turn your Personal Communicator OFF when in a "blasting area” or in areas posted: “Turn off two-way radio.” Obey all signs and instructions. Turn your Personal Communicator OFF, do not remove your battery when you are in any area with a potentially explosive atmosphere, and obey all signs and instructions. Sparks from your battery in such areas could cause an explosion or fire resulting in bodily injury or even death.
European Union Directives Conformance Statement This product is in conformance with the requirements of the applicable EU Council Directives. Declarations of Conformance with the requirements are located at: Safety Information Motorola Ltd.
Getting Started Installing the SIM Card and Battery Note: Some networks let you make emergency calls without a SIM card. Note: Your SIM card can be used in someone else’s personal Personal Communicator and you will be charged for the call, so keep it in a safe place. Do not bend or scratch it and do not expose it to static electricity or water. 11 Getting Started Before you can send or receive messages or calls, you need to install your SIM (Subscriber Identity Module) card and the battery.
Getting Started SIM Card and Battery Installation 1. Remove the battery cover. 2. Slide the SIM card into the recess so that the notch in the card lines up with the notch in the recess. 3. Align the contacts on the battery with the contacts in the battery compartment and press downwards toward the contacts until the battery clicks into place. 4. Replace the battery cover. Note: If the SIM card is inserted incorrectly, “Check Card” is displayed. Remove the SIM card and re-insert it.
Getting Started Control Buttons ] 13 } 13
Getting Started 14 , Press and hold to turn on or off. ( Press to accept and end a call, setting, or option. ) Used to reject or cancel a call, setting, option, and to return to the previous screen. When in text mode, press to delete the previous character. $ Press to enter the Quick Access menu. % Press to access the Main Menu. ! Use to scroll through menus and text, and increase and decrease volume. # Press to read a message. . Press to write a message.
The Display / Displays text and numbers. Signal Strength. The more segments, the stronger the signal strength. k A call is in progress or hanging up. l Displayed when on a system other than your home system. : Home Zone. Availability depends on your service provider. I J \ > B...K z 12:00 Displayed when a Short Message Service (SMS) message is received. Flashes when you have an unread SMS message, or your message storage area is full. Displayed when you have voicemail.
Turning On Your V100 Personal Communicator Press and hold , until your Personal Communicator vibrates or makes a sound. Note: If the SIM card is not installed, your Personal Communicator displays a message to install one. Getting Started Entering your SIM Card Personal Identification Number (PIN) 1. When prompted, enter your PIN and press (. • If you make a mistake, press and release ) to remove the last character, or hold down ) to remove the multiple characters.
Main Menu Example Tips on Using this Guide The Main Menu Your Personal Communicator’s features are accessible through the Main Menu. Press % to display the Main Menu. To scroll through the Main Menu, use !. Press ( to enter a submenu. Menu Navigation Many of your Personal Communicator’s features are accessed by using menus and submenus for selection, change, or cancellation. Please read this section carefully.
Exiting the Menus • ) - press and hold for 2 seconds to exit any menu or screen and return to the Standby screen. Tips on Using this Guide Short and Extended Menus As you become accustomed to your Personal Communicator’s menus and features you use the most, you can select which menus you want readily accessible, and which ones you want to store out of view. With extended menu, all features are always displayed. When you add a feature to the short menu, it is not displayed until you choose to display it.
Prompts and Messages Testing your V100 Personal Communicator It's a good idea to test your service by sending a Short Message Services (SMS) message or by calling a friend or family member, from your Personal Communicator. Start by using the phone number, web site, or email address (and a PIN, if required) your service provider gave you, then try making a call. When you reach a friend or family member, ask them to send a message to you or call you back.
SMS Messages SMS Messages Your Personal Communicator can send and receive Short Message Services (SMS) that are sent by your service provider. These messages are transmitted for a limited amount of time. If a memory location is not available before the message is removed from the network, it is not stored. 20 Sending an SMS Message Press . . Type your message. Press (. From the message editor, select to send the message, then press (.
Entering Numbers in Text Mode • To type a single number, press M then type the number. • To type a series of numbers, press M M. To stop entering numbers, press M M again. 1. Press . and type your message. 2. Press (. 3. Select the store option, then press (. Your message is automatically stored in the Outgoing Message folder. Receiving and Reading an SMS Message Cool...I got a message! Before long you’ll be getting a lot of messages.
Sending Email Messages using SMS Contact your service provider to find out if this option is supported and to get the email server number. Here’s an example of what you type to send a “Hello” message to email address “abc123@isp.com”: abc123:isp.com#Hello. Making a Call Making a Call 22 Note: Don’t forget to use your headset so you can hear your call. Use ! to decrease or increase the volume level. Note: You can press ] to quickly go to your Phone Book, select the number you want to call, then press (.
GSM Emergency Calls The world-wide GSM standard provides a single number, 112, to dial in cases of emergency. The emergency call is directed to a central operator. The call can be made without any security codes and, depending on the network, without a SIM card inserted. Ending a Call Press ( or ). Redialling the Last Number Called from Standby Mode Press (((. Receiving a Call Note: Don’t forget to use your headset so you can hear your call. Use ! to decrease or increase the volume level.
In-Call Menu There are lots of things you can do during a call. To access the in-call menu, press % during a call, to exit the menu, press ). Note: Menu selections depend on the state of the call, the type and setting of your SIM card, and your subscription to these services. The following paragraphs explain all possible options. Hold Call In-Call Menu You can place a current call on hold and accept an incoming call, or start a second call. To put an Active Call On Hold 1. Press % (. 2.
End Active Call When a call comes in while you are already on a call, you can end the active call. 1. Press ( to put the active call on hold. 2. Press %, select the end active call option, then press (. Note: If you have a call on hold, it becomes your active call. Use to go back to a call that’s on hold. Reconnect Held Call This is similar to Reconnect. If you have a call on hold, and a call waiting, select this option to connect with your held call.
Conference Calls Let’s have a phone party! If you have both Conference Call and Call Waiting, you can talk to up to 5 people at the same time. In-Call Menu Starting a Conference Call 1. Call one of the people you want to conference with. 2. Place the active call on hold, dial another phone number, then press (. 26 3. Press % then select Conference Call. Note: There may be times when your request is not successfully completed. Wait a little while, then try your call again.
Transfer Calls Initiating Transfer Call Before the Third Party is Connected 1.Press % and select the transfer call option. 2.Enter the number to where you want the call transferred, then press (. When the call is transferred, you are disconnected automatically. Note: There may be times when a call transfer is not completed successfully. Please try again. Initiating Transfer Call After the Third Party is Connected Press % and select the transfer call option.
Reject Waiting Call When you’re too engaged to talk, you can reject an incoming call by pressing and holding ). Voice Notes Voice Notes With VoiceNotes, you can record up to three minutes of voice messages for yourself or record part of a call. You can record when your Personal Communicator is idle, when you are on a single call, or when you are on an active call with a waiting call. Recording a VoiceNote 1. To start recording, press &. 2. To stop recording, press & again.
Voice Activation With Voice Activation you can dial a phone number or access a feature with a single spoken command called a Voice Tag. You can assign Voice Tags to Phone Book numbers and to Quick Access features. •You cannot assign Voice Tags to numbers in your SIM card memory. •When recording a Voice Tag, you cannot make or receive calls. •For best results, make sure there is no background noise and speak in a clear, natural voice when recording.
Add Voice Tag When you add an entry to your Personal Numbers list, your Personal Communicator asks you if you want to add a Voice Tag. If you don’t want to add a Voice Tag, press ). Voice Activation To add a voice tag: 1. Press (. Note: If there are already 25 Phone Book Voice Tags in your Personal Communicator, you need to delete one before you can add another. 2. When prompted by the Personal Communicator, press ( and record after the tone. 3.
Using Voice Activation with Phone Book Entries Voice Activation from the Standby Mode 1. Press ]. When prompted, say the Voice Tag name. The Personal Communicator highlights the matching entry in your phone book list. If there is no matching entry, the Personal Communicator highlights an alternate entry in the list. 2. Press ( to make the call, ! to select a different entry, or ) to cancel. Voice Activation from the Phone Book Menu 1. Select Voice Dialling from the Phone Book menu. 2.
Access Internet Access Internet When you’re on the go, you can still keep up with the latest news, sports scores, entertainment stories, check flight status, and much more. Access Internet is a network and subscription-dependent feature that offers mobile internet access of Information Services and certain web sites using the Wireless Application Protocol (WAP). Contact your service provider for details about these services.
Internet Browser Menu 1. Press and hold % for at least 2 seconds. Note: If you release % too quickly, you might enter the menu for the currently highlighted option. 2. Scroll to the menu selection you want, then press (. A typical browser menu might include: • • • • Help - provides help for the previously highlighted option. Home - return your to your ISP’s home page. Mark site - lets you add a site to your Bookmarks folder. Setup - contains the options to set up your ISP access.
Mobile Internet Messages Messages displayed in the bottom left portion of the screen indicate when activites such as receiving or sending data, connecting to the internet, and internet activities are being performed. A u indicates you are in a non-secure internet location. Access Internet Note: Your ISP determines the icons and messages displayed on your Personal Communicator.
Setting Up for Mobile Internet Access • • • • • • •Primary Data Gateway: the IP address to access the mobile internet. •Phone Number: the number your Personal Communicator calls to access the internet. This is provided by your ISP. User Name: provided by your ISP. User Password: provided by your ISP. Baud Rate: this is likely to be 9600, the standard data rate for GSM phones. Idle Time Out: the amount of time the Personal Communicator waits before hanging up if it detects no internet activity.
Setting a Bookmark Access Internet You can set up bookmarks so you can quickly access your favorite internet sites. 1. From your browser menu, select Mark Site. 2. Press any key from 1 to 9 when prompted. The Personal Communicator provides a confirmation message that the bookmark has been stored. 3. To go back to the bookmark, press and hold the appropriate location number key (1 to 9). Internet Service Alerts You do not need to be using the mobile internet to receive an internet service alert.
Phone Book You can store important numbers in your Phone Book so you can retrieve them quickly and easily. You can store up to 40 entries in a Fixed Dialling list, if you have this feature. Fixed Dialling allows limited use of your Personal Communicator to particular numbers, or, if you wish, to country codes, area codes, or other prefixes of your choosing. Each Phone Book entry contains: • • • 37 A telephone number. Up to 32 digits can be stored, but this is reduced to 20 digits for SIM card locations.
Inserting Pauses Into Phone Numbers Pauses can be inserted into a string of numbers to allow the called number time to react to certain activities such as going into voice mail or entering a password. To insert a three-second pause in a phone number, press and hold (*) until Ü is displayed. Phone Book For example, you have voicemail on 555-6911, with mailbox number 1066 and password 2001. Then you can dial: 5556911Ü1066Ü2001 then press (. 38 The first part of the number calls the voicemail system.
Personal Numbers Use to create and manage your list of personal numbers. Find Entry By Name Use to find a number from your list of Phone Book names by typing up to three of the first characters of the name, then press (. Use to select a number from your list of Phone Book locations. 1. At the prompt, enter a location number, then press (. If the number is not valid, the Phone Book list is displayed and the number closest to your entry is highlighted. 2. Use ! to navigate through the entries. 3.
Add Entry Phone Book Allows you to add a phone number and name to the Personal Communicator’s (phone) memory or to SIM card memory. 1. When prompted, enter the phone number, name and a location number. If you do not specify a location number, the entry is stored in the next available location. 2. The Personal Communicator then asks if you want to enter a Voice Tag. For information about Voice Tags, please see “Add Voice Tag” on page 30. 3. If you don’t want to add a Voice Tag, press ).
Last Ten Calls When selected, allows you to review time and date information of your last 10 missed or answered calls, or to calls you made. Depending on your selection, you can redial a phone number, store a phone number, or erase all of the phone numbers. My Phone Numbers When selected, displays your list of phone, fax and data numbers. From the submenu, you can: • Modify Name or Details - to make changes to the selection. • Switch View - to display information for the selected entry.
View Fixed Dial List Use ! to scroll through the numbers in the list. Press ( to make a call. Setup Fixed Dialling Use to turn Fixed Dialling on or off, and to enter or change entries in the list. After you enter your PIN2 code, you can: Edit Entry - scroll to the entry you want to change, press ( to edit the entry or ) to erase it. • Add Entry - to add a phone number and name, and a location number. If you do not specify a location number, the entry is stored in the next available location.
One-Touch Dialling from Phone Book Numbers • • Dialling Phone Book Numbers with Smart Button Press ] and say the Voice Tag name after the tone. Press ] then scroll to the number, or press the appropriate number to skip to a particular letter. Alarm Clock You can set up to 5 alarms on your Personal Communicator, and attach a 40-character memo to each alarm.
Show Alarm Status When selected, displays the alarms that are set. Use ! to select an alarm. From the submenu, you can: Call Related Features • • • Switch View - see the details for alarm. Select Switch View again to return to the previous screen. Edit Alarm - change the time, date, and attached memo. Disabled Alarm - suspends (but does not delete) the alarm. Call Related Features Show Battery Meter Displays the remaining battery charge. The more segments displayed, the more battery charge is left.
Call Diverting You can have incoming calls sent to other phone numbers. Divert Voice Calls You can have all voice, fax, and data calls sent to other phone numbers. From the submenu you can: • • • 45 Divert When Unavailable - diverts all incoming Voice calls to a single number whenever your Personal Communicator is unavailable. To divert, select On, then enter a diversion phone number.
• Call Related Features • Divert Fax Calls - diverts Fax calls to a single number. When set to On, you need to enter a diversion phone number. • Divert Data Calls - diverts Data calls to a single number. When set to On, you need to enter a diversion phone number. Cancel All Diverting - cancels diversion of incoming calls, resets all diversion settings to Off, and removes all diversion numbers.
Bar Incoming Calls • When Roaming - bars incoming calls when you are roaming. • All Calls - bars all incoming calls. • Off - removes call barring for all calls. Cancel All Barring Cancels this option for all calls. Change Bar Password When prompted, enter the current password, then enter and confirm a new 4-digit password. 47 Call Related Features Bar Outgoing Calls • Int’t Calls - bars all outgoing international calls.
Messages Menu Call Voicemail Select to make a call to your voicemail number. Messages Menu Received Messages Note: For quick access, press #. Displays the number of new and old SMS messages, then displays the message list. 1.Use ! to scroll through your message list. 2. Most times, only a portion of your message is displayed. To view the entire message, press (to see your options. Switch View Displays the entire message. Press (return to the view options screen. Delete Message Deletes the message.
Note: Only 20 characters (32 characters, if GSM1900) of a number can be retrieved. If the number is longer than allowed, the remaining characters are not retrieved. Space and - (dash) characters are not counted as part of the character length. Reply to Message Return Call When there is a phone number attached to a message, you can call the person who sent the message to you. Edit Message You can use the message editor to edit the message.
Outgoing Messages Note: You cannot send outgoing messages until the Message Service Center number has been set. You can view and manage your outgoing messages that are stored on your SIM card. When selected, the number of messages is displayed followed by the first message in the list. Messages Menu To send a Stored SMS Message Select the message from your message list, press (to view your options, then send it. Switch View Displays the entire message. Press (return to the view options screen.
Delete Message Use to delete the current message. Note: Before you delete a message, make sure the message you want deleted was selected in your received message screen. Use to display the next outgoing message. Message Editor Compose an SMS message and send it to a friend, or store it to send it later. • • • • • • 51 For a single capital letter, press and release +, then type the letter. For multiple capital letters, press ++. To switch back to lowercase letters, press ++ again.
VoiceNotes Messages Menu Play, erase, or show remaining time available for your recorded VoiceNotes. See “Voice Notes” on page 28 for more information. Play VoiceNote 1. Scroll to the VoiceNote you want to play, then press (. 2. Press ) to stop playback. 3. To erase, set an alarm for a VoiceNote, or go to the next VoiceNote, press ( to display the options menu. • Erase VoiceNote - erases the selected VoiceNote • Set Alarm (Alarmed VoiceNotes) - You can set an alarm to up to 5 VoiceNotes.
Cell Broadcast Note: Your Personal Communicator can receive these messages only when it is in Standby mode. While a broadcast message is scrolling across the screen, you can: • To stop and start the message, press !. • To remove the message, press ). Note: The ! functions change while you are receiving a cell broadcast message. You need to remove the message before ! functions return to normal.
Language List Use to select a different language for Cell Broadcast messages. Availability depends on the type and settings of the SIM card, and/or your subscription to this feature. Message Settings Messages Menu Voicemail Number You can enter, modify, or delete your voicemail number. Note: Remember to add the + symbol and the appropriate country code prefix to the phone number. Service Centre You can modify or delete it as desired.
Outgoing Message Type This option is network dependent and can be used to specify the format of your outgoing messages. You can select Text (default), Fax, X400, Paging, E-Mail, ERMES or Voice. You do not need to select Voice to send messages to Voicemail boxes. You can set custom alerts, the time and date, security codes, the contrast of your display, and other features. Select Phone Line Allows you to switch between Line 1 and Line 2 of your Personal Communicator.
Set Ringer Tone Use to select a musical alert or a standard ringing tone for incoming calls. Set Ringer Tone 2 Use to select a tone alert for incoming calls on Line 2. This option is not available if you do not subscribe to Line 2. Phone Setup Set Alarm Ringer Tone Use to turn the alarm alert ringer tone on or off. Set Message Alert Tone Use to set a musical alert or standard tone for incoming SMS messages.
• • Change the duration of a note or rest by placing the cursor between the note and the duration indicator, then enter the duration length: 1 is the shortest, 6 is the longest and equals one second. Change the octave of the note by placing the cursor on the note and use ! to increase or decrease it. You can also change the tempo of your tune to 1 (slowest), 4 (fastest), or 2 and 3 for somewhere in between. Now you are ready to listen (play) to your new tune.
Automatic Lock When set to On, your Personal Communicator is locked automatically when it is turned on. To use it, enter the unlock code. Lock Now Phone Setup Immediately locks your Personal Communicator from further use. To use it again, enter the unlock code. Change Unlock Code Use to change your unlock code. Follow the prompts given by the Personal Communicator, and enter a new code. The code set by the manufacturer is 1234. If this code does not work, check with your service provider.
Change SIM PIN2 Code You can change your SIM PIN2 code just like you do your standard SIM code. New Security Code Enter the current security code, then a new six-digit code. Enter the new code again to confirm. The security code is set by the manufacturer to 000000. If this code does not work, see your service provider. Extended Menus Turn extended menus on or off. When Off, you are not be able to access any of the extended features.
Set Time Format You can change to either 12-hour or 24-hour format. Language Selection All your prompts and help messages will be displayed in the language you select. Phone Setup Battery Saving Mode Set this to On to help your battery lasts longer. All status indicators and the backlight for incoming Cell Broadcast messages are turned off. Select Keypad Tones You can set this so you hear tones when you press the buttons on your Personal Communicator, or you can also turn off the tones.
• Restores language selection, band selection, and extended menus to their default settings. Restores keypad tones to normal, ringer tones to standard, SMS alert tones to standard, volume level to medium, and network search frequency to medium. Master Clear Note: All phone book entries are deleted with this option! Please use it with caution.
Network Selection Network Selection To make and receive calls, your Personal Communicator must be registered with one of the available networks. These can be either GSM900, GSM1800 or combined GSM900/ 1800 network types. Your Personal Communicator automatically searches for the last network used. If this network is not available, your Personal Communicator attempts to register with a different network.
Network Search Determines how often your Personal Communicator attempts to register with a network and how the attempt is made. Set this to an automatic search (performed by your Personal Communicator) or to manual search (performed by you). • • Automatic Search - Your Personal Communicator automatically generates a list of networks and then tries to register with the first network in the list. If registration fails, it tries to register with the next listed network.
Preferred Networks Add Network to List You can add networks to your preferred list. Network Selection • 64 • • If you choose from the available list, your Personal Communicator scans for the networks in your area, then displays the list. To store one in your preferred list, follow the instructions given by your Personal Communicator. You can select one from a list of known networks, then store it in your preferred list.
You can have your Personal Communicator keep track of your calling time and charges. You can also have audible alert tones to let you know how long you have been on a call. Your Personal Communicator can accept values up to 21 digits long, although during calls it can only display the last 12 digits. In addition, you can set a maximum charge limit so that your Personal Communicator monitors either the number of units used or the call charges, and not allow the limit to be exceeded.
Set Audible Call Timers You can set single or repetitive audible alerts at preset times to help you keep track of your time and charges. Set In-Call Display Call Meters Menu Set this option to display the time or charge meters displayed during a call. Note: If you have a total charge limit set, your remaining credit is always displayed. Show Time Per Call Displays the time meter during your calls. Note: If you have the Advice of Charge service, your chargeable calls are always displayed.
Reset Call Charges Use this to reset all your meters to zero. Set Total Charge Limit • When set to On, you need to enter a new limit as either units or currency, depending on the setting of your Set Charge Type option. Note: Units are entered as whole numbers and currency is entered by name. For example, GBP for UK, DEM for Germany, or FFR for France. Note: You cannot make fax or data calls when you have this option set to On. Reset or turn off your Total Charge Limit option to make more chargeable calls.
Quick Access Menu Quick Access Menu 68 While the features in your Personal Communicator are available through easy-to-use menus, some of the most commonly used features are also available in the Quick Access menu. Each feature in the menu is assigned a location number from 1 to 9. a 1 W 2 O3 R 4 K5 L6 Add to SIM? Quick Access Menu Example Press $ to display the Quick Access menu. The menu shown in the example represents some of the features you can set up in your Quick Access menu.
Note: If a feature is already stored in the location number you choose, the new feature takes that location and the older feature is automatically removed. Adding or Editing Voice Tags to Features in Your Quick Access Menu 1. From your quick access configuration menu, highlight the feature then press (. 2. Select the “Add or Edit Voice Tag” option and press (. 3. When prompted, say a Tag name. If there is a matching Voice Tag, the Personal Communicator repeats the name and displays the entry. 4.
Non-Roman Characters Non-Roman Characters To enter non-Roman characters, press M * and the letter key from the following table. Multiple presses of the key may be required to access the character. For example, to type è, press M *, then press E twice.
71 M* 1 time G Γ L Λ Z Ξ C Ç B β N ñ ?/ ¿ !: i M* 2 times Ñ M* 3 times M* 4 times M* 5 times M* 6 times M* 7 times Non-Roman Characters Keyboard Character 71
Accessories The following accessories are designed to work with your Personal Communicator. Additional accessories may be available separately. Please refer to your local service provider or retail outlet for more information. Headset Accessories The headset provides hands free use of your Personal Communicator and is required for phone operation. Power Adapter The Power Adapter (charger) connects directly to your Personal Communicator.
Troubleshooting Personal • Check the battery. Is it charged, properly fitted and are the contacts clean Communicator and dry? does not turn on You can’t make • Check the signal strength meter. If the signal is weak, move to an open calls space or, if in a building, move close to a window. • Check your network settings. Try to select another network. • Check your coverage map. Are restrictions set? • Check your Call Barring and Fixed Dialling settings.
Troubleshooting Your PIN2 is blocked Your SIM card won’t work 74 The battery won’t charge The battery icon and meters are missing • Enter the PIN2 unblocking code supplied with your SIM card. • Is the card inserted correctly? • Is it chipped, scratched, or visibly damaged? Return it to your service provider. • Check the SIM contacts. If dirty, clean them with an antistatic cloth. • Check the charger. Is it properly connected? Are its contacts clean and dry? • Check the battery contacts.
You can’t cancel Call Diverting or Call Barring The I symbol is flashing I can’t make international calls 75 • Are you in an area of variable coverage? This uses extra battery power. • Is it a new battery? A new battery needs two to three charge/discharge cycles to attain normal performance. • Is it an old battery? Battery performance declines after several years of use.
Use and Care glub Use and Care XXX 76 Clean with a soft cloth dampened with soap and water. Do not immerse in water. Do not use alcohol or other cleaning solutions. Do not expose to excessive heat ... ... or extreme shock ... ... or moisture.
At Motorola, Total Customer Satisfaction is a top priority. If you have a question, a suggestion or a concern about your Motorola Personal Communicator, Motorola wants to hear from you.
WARRANTY INFORMATION WARRANTY INFORMATION 78 Motorola guarantees to you, the original purchaser, the Personal Communicator and accessories which you have purchased from an authorised Motorola dealer (the “Products”), to be in conformance with the applicable Motorola specifications current at the time of manufacture for a term of [1] year from date of purchase of the Product(s) (Warranty Term).
(*) including without limitation loss of use, loss of time, inconvenience, commercial loss, lost profits or savings. In most cases the authorised Motorola dealer which sold and/or installed your Motorola Personal Communicator and original accessories will honour a warranty claim and/or provide warranty service.
WARRANTY INFORMATION 80 accessories, batteries, parts, and Personal Communicator equipment that have been replaced shall become the property of Motorola. Motorola does not warrant the installation, maintenance or service of the products, accessories, batteries or parts.
81 WARRANTY INFORMATION 6. Defects or damage due to range, coverage, availability, grade of service, or operation of the system by the operator. 7. Defects or damage due to moisture, liquid or spills of food. 8. Control unit coil cords in the Product that are stretched or have the modular tab broken. 9. All plastic surfaces and all other externally exposed parts that are scratched or damaged due to customer normal use. 10. Leather cases (which are covered under separate manufacturer's warranties). 11.
Index Index A 82 Add a Person .......................................... 26 Control Buttons ........................................... 13 How to Use ............................................. 18 Access Internet ............................................ 32 Alarm Clock ................................................. 43 Available Networks ...................................... 62 D B E Backlight ...................................................... 15 Battery Charging .......................
N Networks Change Band ..........................................62 Finding New ............................................64 Registration .............................................63 Search .....................................................63 Selection .................................................62 Available .................................................62 Non-Roman Characters ...............................70 O One-Touch Dial Setting up ................................................
Adding Location Numbers ...................... 68 Adding/Editing Voice Tags ..................... 69 Setup ...................................................... 57 Index Transfer Calls .............................................. 27 Troubleshooting ........................................... 73 R U Receiving a Call ........................................... 23 Redialling the Last Number Called .............. 23 Restrict ID on Next Call ............................... 44 Restrict My Number .........
Personal Numbers 85 Service Provider Number Family and Friends Number Personal Numbers You can use this page to keep track of important numbers.
Printed in the U.S.A 7/00 6881036B80-O @6881036B80@ Personal Communications Sector 1500 Gateway Blvd., Boynton Beach, FL 33426-8292 UK English MOTOROLA, the Stylised M Logo, and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. © 2000 Motorola, Inc. All rights reserved.
Motorola V100 Personal Communicator Quick Reference Card Control Buttons , Press and hold to turn on or off. ( Accept and end a call, setting, or option. ) Reject or cancel a call, setting, option, and to return to the previous screen. In text mode, deletes the previous character. $ Press to enter Quick Access menu. ! Scroll through messages and text, and increase and decrease volume. # Press to read a message. . Press to write a message. M Used to enter numbers 0 - 9.
that is displayed in the bottom middle of the screen, %. When you want to go to a previous screen, press ). Making a Call Note: Use your headset and use ! to adjust the volume. Press ] to go to Phone Book, or use Voice Tags, select the number, press (. Note: Press and release ) to remove the last character, press and hold ) to remove multiple characters. Ending a Call Press ( or ). Receiving a Call Note: Use your headset and ! to adjust the volume. Press ( to answer the call.
