Personal Communicator User's Guide

displayed in the bottom middle of the screen, %. When you want
to go to a previous screen, press
).
Making a Call
Note: Use your headset and use ! to adjust the volume.
Press
] to go to Phone Book, or use Voice Tags, select the
number, press
(
.
Note: Press and release
) to remove the last character, press
and hold
) to remove multiple characters.
Ending a Call
Press ( or ).
Receiving a Call
Note: Use your headset and ! to adjust the volume.
Press
( to answer the call.
Note: When communicator is closed or in the holster, press
} to
answer a call and to end a call.
SIM Card and Battery Installation
1. Remove the battery cover.
2. Align the SIM card so the notch in the card lines up with the
notch in the recess, insert card.
3. Align the battery contacts with the contacts in the battery
compartment. Press down on the battery until it clicks into
place.
4. Replace the battery cover.
Note: If the SIM card is inserted incorrectly, “Check Card” is
displayed. Remove the SIM card and re-insert it. If the card does
not work, contact your service provider.
Charging your Battery
Charge the battery by inserting the adapter plug into the port on your
communicator and plugging the adapter into a wall outlet.
✂