Personal Communicator User's Guide

Getting Started

SIM Card and Battery Installation

1. Remove the battery cover.

2. Slide the SIM card into the recess so

that the notch in the card lines up

with the notch in the recess.

3. Align the contacts on the battery with

the contacts in the battery

compartment and press downwards

toward the contacts until the battery

clicks into place.

4. Replace the battery cover.

Note: If the SIM card is inserted

incorrectly, “Check Card” is displayed. Remove the SIM card and re-insert it. If the card

does not work, contact your service provider.

Charging Your Battery:

• Charge the battery by inserting the adapter plug into the port on your Personal

Communicator and plugging the adapter into a wall outlet.

• Charge your battery at room temperature and never leave it in really hot, cold, or

wet places.

• Charge only Motorola batteries in your Personal Communicator.

SIM Card

Recess

Battery

Charger

Port

Slide Battery

Door Lock

to Open

Battery

Compartment

Slide to Remove

Battery Door