GPS Module for Embedded OEM Quick Start Guide

Figure 5 - Suggested RS-232 GPS Receiver to Computer and Time Sync Interface
Bill of Materials
Item Qty Ref Value
1-3 1 C1, C5, C6 0.1 uF bypass capacitors
4 1 C2 1 uF 35v Tantalum.
5 1 C3 100 uF 35v electrolytic
6 1 C4 470 pF
7 1 R1
10 kΩ
8 1 R2
390Ω
8 1 D1 IN5817 Schottky Diode or similar
9 1 BT1 3 volt Lithium Battery (and holder)
10 1 U1 MAX233
11 1 U2 74HC132
12 1 U3 LM7805 or PT5101 5 volt regulator
13 1 LED
14 1 P1 DB9 Female connector
15 1 J1 10 pin male PCB header connector
16 1 J2 Coaxial power connector, female PCB mount
17 1 Cable 10 pin ribbon cable with female 10 pin female header each end
18 1 sockets 14 pin & 20 pin IC sockets
19 1 Holder Coin cell lithium battery holder
20 1 misc. 0.1’ prototype PCB, RG-174 with BNC or SMB Female connector
21 1 Case Appropriate project case
Table 3 - Parts List
QUICK-START GUIDE, MOTOROLA Oncore™ GT - GPS Module for Embedded OEM
7