Specifications

Connecting Ojo
Connect Ojo as described below:
1 Turn off the modem and router power.
2 Confirm that your modem is correctly connected to your router.
3 Plug one end of the provided Ethernet cable into the “ROUTER/MODEM”
port on the back of Ojo and the other end into an open port on the router.
4 Plug one end of the telephone cable into a phone jack and the other end
into the “WALL” port on the back of Ojo.
5 Turn on the power to the modem, wait one minute, and then turn on the
power to the router.
6 Plug one end of the Ojo power cord into the Ojo power block and the
other end into an electrical outlet.
7 Plug the Ojo power block into the “12V” port on the back of Ojo.
4
Getting Started
Connects to
Router
Connects to
Phone Jack
Power