Cell Phone User's Guide

148
Using a Headset
If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and
the speaker at the same time:
1 From the main menu, select Settings >
Advanced > Headset/Spkr.
2 Select HdsetOnly to send incoming sound to
the headset only. -or-
Select Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
Note: If you are using your phone with a
headset, and you have the Flip to End
option set to On, closing your flip sends
incoming sound to the headset and does
not end the call. See “Setting Flip Actions”
on page 50.
Attaching a Headset
1 Lift the audio jack cover.
2 Insert the headset connector firmly into the
audio jack. You may have to rotate the headset
connector until it fits securely into the audio jack.
Using a Remote Boost
Walkie-Talkie
TM
Button
If you are using a headset or other accessory with
a remote Boost Walkie-Talkie
TM
button, you can
use the remote Boost Walkie-Talkie
TM
button for
phone calls and Boost Walkie-Talkie
TM
calls.
For phone calls, use the remote Boost
Walkie-Talkie
TM
button to answer calls, switch
between calls, and end calls. Hold the remote
Boost Walkie-Talkie
TM
button for less than 2
seconds to answer calls and switch between calls.
Hold the remote Boost Walkie-Talkie
TM
button for
more than 2 seconds to end calls.
For Boost Walkie-Talkie
TM
calls, use the remote
Boost Walkie-Talkie
TM
button as you would the
Boost Walkie-Talkie
TM
button on your phone.