Multi-Service Wearable Getting Started

GETTING STARTED
43
i1000
2. Press under “Ok”.
3. To talk, press the PTT button and wait for the chirp.
RECEIVING A GROUP CALL
No action is necessary to receive a Group call as long as your
portable is not busy in an active Phone or Private call. You can
receive group calls only on the talkgroups that you have predefined.
For more information, see “Talkgroup Naming”.
Any communication activity within the talkgroup that you select
automatically switches your portable into Group mode.
AREA SELECTION
When in Group mode, you can call only those talkgroup members in
a specific location. This is useful when you know where the
individuals are located within the service area.
1. Press until you see “Group Ready” on your display.
2. Press once, then press under “Area”.
3. Press to scroll through the targeted areas specified by
your local service provider.
4. Press under “Ok” to select the targeted area.
TALKGROUP NAMING
To add a talkgroup name to your portable:
1. Press .
2. Press under “Ok”.
3. At “Add New Entry?”, press under “Ok”.
4. At “Enter ID”, enter the desired talkgroup number.
5. Optional: At “Enter Name”, enter a name for the talkgroup.
6. Press under “Store”.
CALL ALERTS
You can access Call Alert from Group and Private modes. Using Call
Alert, you can page your talkgroup by sending an audible tone.
For more information, see “Sending a Call Alert” on page 38.
Mode
MENU
2
ABC
2
ABC
Group Mode
i1000 Page 43 Wednesday, June 17, 1998 1:53 PM