Multi-Service Wearable Getting Started

GETTING STARTED
37
i1000
3. Press and hold the PTT button, wait for the chirp, then
speak into the microphone.
Name Method
1. Press until you see “Prvt Ready” on your display.
2. Press until you see the “Name” menu option on
your display.
3. Press under “Name”.
4. Press the key with the first letter of the name
associated with the Private ID.
5. Press to find the desired name in the list.
6. Press and hold the PTT button, wait for the chirp, then
speak into the microphone.
RECEIVING A PRIVATE CALL
When you receive an incoming Private call, you hear a brief tone.
Your unit automatically switches to Private mode, and the Private ID
or the name of the caller displays.
Wait for the caller to finish speaking, then press and hold the PTT
button. Begin speaking after you hear the chirp.
PROGRAMMING YOUR PRIVATE ID
To store your Private ID in your portable:
1. Press .
2. Press under “Ok”.
3. Enter the Private ID provided by your carrier.
4. Press under “Store”.
RECALLING YOUR PRIVATE ID
1. To recall your portable’s private ID, press .
This is the number supplied by your carrier, that you must store in your
portable. See “Programming Your Private ID” above.
2. Press under “Exit”.
Mode
MENU
2
ABC
2
ABC
Private Mode
i1000 Page 37 Wednesday, June 17, 1998 1:53 PM