Specifications

213

Link: Ports: DSL

The DSL port selection shows the state of the DSL line, whether it is up or down and how many times the

Gateway attempted to train. The state should indicate ‘up’ for a working conﬁguration. If it is not, check the

DSL cable and make sure it is plugged in correctly and not connected to a micro ﬁlter. Below is an example:

ADSL Line State: Up

ADSL Startup Attempts: 5

ADSL Modulation: DMT

Datapump Version: 3.22

Downstream Upstream

---------- ----------

SNR Margin: 18.6 14.0 dB

Line Attenuation: 0.4 4.0 dB

Errored Seconds: 14 3

Loss of Signal: 4 4

Loss of Frame: 0 0

CRC Errors: 0 0

Data Rate: 8000 800