Specifications

220
set ip ethernet A rip-receive { off | v1 | v2 | v1-compat | v2-MD5 }
Specifies whether the Motorola Netopia® Gateway should use Routing Information Protocol
(RIP) broadcasts to update its routing tables with information received from other routers
on your network.
If you specify v2-MD5, you must also specify a rip-receive-key. Keys are ASCII strings
with a maximum of 31 characters, and must match the other router(s) keys for proper oper-
ation of MD5 support.
Additional subnets
See “DHCP Settings” on page 198 for subnet range configuration commands.
set ip ethernet A subnet [ 2 ... 8 ] option [ on | off ]
Enables or disables additional LAN subnets. Up to seven additional subnets may be config-
ured.
set ip ethernet A subnet n address ip_address
Specifies an IP address for the subnet n , when subnet n option is on.
set ip ethernet A subnet n netmask netmask
Specifies the subnet mask for the subnet n , when subnet n option is on.
Default IP Gateway Settings
set ip gateway option { on | off }
Specifies whether the Motorola Netopia® Gateway should send packets to a default Gate-
way if it does not know how to reach the destination host.
set ip gateway interface { ip-address | ppp-vccn }
Specifies how the Motorola Netopia® Gateway should route information to the default
Gateway. If you select ip-address, you must enter the IP address of a host on a local or