Specifications

203
CONFIG Commands
set dhcp gen-option data-type [ ascii | hex | dotted-decimal ]
Specifies the DHCP gen-option data type: ascii, hex or dotted-decimal.
set dhcp gen-option data data
Specifies the gen-option data.
• If the data-type is ascii, then any printable character + octal representations
(e.g.”\0007”) and hex representations (e.g. “\xA4”).
• If the data-type is hex, then an even number of hex characters (e.g.
“0123456789AbcdEf”
• If the data-type is dotted-decimal, then a series of numbers between 0 and 255, sep-
arated by a period (.). IP addresses are generally represented in this form.
249 (note) Microsoft uses this instead of 121 N Yes
255 Empty 0 No
Option Data Format
Data Size
(bytes)
Can
Configure