User guide

245

CONFIG Commands

DSL Forum settings

TR-064 is a LAN-side DSL CPE conﬁguration speciﬁcation and TR-069 is a WAN-side DSL

CPE Management speciﬁcation.

set dslf-lanmgmt option [ off | on ]

Turns TR-064 LAN side management services on or off. The default is on.

TR-064. DSL Forum LAN Side CPE Conﬁguration (TR-064) is an extension of UPnP. It

deﬁnes more services to locally manage the Netopia Gateway. While UPnP allows open

access to conﬁgure the Gateway's features, TR-064 requires a password to execute any

command that changes the Gateway's conﬁguration.

set dslf-cpewan option [ off | on ]

set dslf-cpewan acs-url "

acs_url:port_number

set dslf-cpewan acs-user-name “

acs_username

”

set dslf-cpewan acs-user-password “

acs_password

”

Turns TR-069 WAN side management services on or off. The default is off.

TR-069. DSL Forum CPE WAN Management Protocol (TR-069) provides services similar to

UPnP and TR-064. The communication between the Netopia Gateway and management

agent in UPnP and TR-064 is strictly over the LAN, whereas the communication in TR-069 is

over the WAN link for some features and over the LAN for others. TR-069 allows a remote

Auto-Conﬁg Server (ACS) to provision and manage the Netopia Gateway. TR-069 protects

sensitive data on the Gateway by not advertising its presence, and by password protection.

The auto-conﬁg server is speciﬁed by URL and port number. The format for the ACS URL is

as follows:

http://

some_url.com

port_number

http://

some_ip_address

port_number

A username and password must also be supplied, if TR-069 is enabled.