User guide

244
☛ Note:
To make a set of VLANs non-routable, the lan-uplink port must be included in
at least one VLAN and must be excluded from any VLANs that are non-
routable.
UPnP settings
set upnp option [ on | off ]
PCs using UPnP can retrieve the Gateway’s WAN IP address, and automatically create NAT
port maps. This means that applications that support UPnP, and are used with a UPnP-
enabled Netopia Gateway, will not need application layer gateway support on the Netopia
Gateway to work through NAT. The default is on.
You can disable UPnP, if you are not using any UPnP devices or applications.