User guide

239

CONFIG Commands

set system syslog log-violations on

set system syslog log-accepted on

set system syslog log-attempts on

4. Set NTP parameters

• Type config

• Set the time-zone – Default is 0 or GMT

set system ntp time-zone <zone>

(example: set system ntp time-zone –8)

• Set NTP server-address if necessary (default is 204.152.184.72)

set system ntp server-address <ip-addr>

(example:

set system ntp server-address 204.152.184.73)

• Set alternate server address

set system ntp alt-server-address <ip-addr>

5. Type the command to save the conﬁguration

• Type save

• Exit the conﬁguration interface by typing

exit

• Restart the router by typing

restart

The router will reboot with the new conﬁguration in effect.