User guide

224
router-accessdefault-mapping (onoff) [ off | on ]:
tcp-seq-diff (0) [ 0 - 65535 ]:
deny-fragments (off) [ off | on ]:
For RFC1483 encapsulation the commands would be:
Netopia-3000/10114104 (state-insp)>> set
state-insp
udp-timeout (182) [ 30 - 65535 ]:
tcp-timeout (14400) [ 30 - 65535 ]:
dsl vcc1
option (on) [ off | on ]:
router-accessdefault-mapping (onoff) [ off | on ]:
tcp-seq-diff (0) [ 0 - 65535 ]:
deny-fragments (off) [ off | on ]:
For an Ethernet WAN Gateway, the commands would be:
Netopia-3000/10114104 (state-insp)>> set
state-insp
udp-timeout (182) [ 30 - 65535 ]:
tcp-timeout (14400) [ 30 - 65535 ]:
ethernet B
option (on) [ off | on ]:
router-accessdefault-mapping (onoff) [ off | on ]:
tcp-seq-diff (0) [ 0 - 65535 ]:
deny-fragments (off) [ off | on ]:
Netopia-3000/10114104 (top)>> security state-insp xposed-addr
Netopia-3000/10114104 (security state-insp xposed-addr)>>
view
===============================================
xposed-addr
exposed-address# "1"
start-ip 1.2.2.2
end-ip 1.2.2.2
protocol any
exposed-address# "3"
start-ip 1.3.4.5
end-ip 1.3.4.5
protocol any