User guide

215
CONFIG Commands
set PPP module [vccn] magic-number { on | off }
Enables or disables LCP magic number negotiation.
set PPP module [vccn] protocol-compression { on | off }
Specifies whether you want the Netopia Gateway to compress the PPP Protocol field when
it transmits datagrams over the PPP link.
set PPP module [vccn] lcp-echo-requests { on | off }
Specifies whether you want your Netopia Gateway to send LCP echo requests. You should
turn off LCP echoing if you do not want the Netopia Gateway to drop a PPP link to a nonre-
sponsive peer.
set PPP module [vccn] failures-max integer
Specifies the maximum number of Configure-NAK messages the PPP module can send
without having sent a Configure-ACK message. The integer argument can be any number
between 1 and 20.
set PPP module [vccn] configure-max integer
Specifies the maximum number of unacknowledged configuration requests that your Neto-
pia Gateway will send. The integer argument can be any number between 1 and 10.
set PPP module [vccn] terminate-max integer
Specifies the maximum number of unacknowledged termination requests that your Netopia
Gateway will send before terminating the PPP link. The integer argument can be any num-
ber between 1 and 10.
set PPP module [vccn] restart-timer integer
Specifies the number of seconds the Netopia Gateway should wait before retransmitting a
configuration or termination request. The integer argument can be any number between 1
and 30.