User guide

211
CONFIG Commands
set ip static-routes destination-network net_address
rip-advertise [ SplitHorizon | Always | Never ]
Specifies whether the gateway should use Routing Information Protocol (RIP) broadcasts to
advertise to other routers on your network and which mode to use. The default is SplitHo-
rizon.
delete ip static-routes destination-network net_address
Deletes a static route. Deleting a static route removes all information associated with that
route.
IPMaps Settings
set ip-maps name < name > internal-ip < ip address >
Specifies the name and static ip address of the LAN device to be mapped.
set ip-maps name < name > external-ip < ip address >
Specifies the name and static ip address of the WAN device to be mapped.
Up to 8 mapped static IP addresses are supported.