User guide

196
set dhcp lease-time lease-time
If you selected server, specifies the default length for DHCP leases issued by the
Netopia Gateway. Enter lease time in dd:hh:mm:ss (day/hour/minute/second) format.
set dhcp server-address ip_address
If you selected relay-agent, specifies the IP address of the relay agent server.
DMT Settings
DSL Commands
set dmt type [ lite | dmt | ansi | multi ]
Selects the type of Discrete Multitone (DMT) asynchronous digital subscriber line (ADSL)
protocol to use for the WAN interface.
☛ NOTE:
dmt type is not supported for Annex B (335x) platforms.
set dmt autoConfig [ off | on ]
Enables support for automatic VPI/VCI detection and configuration. When set to on (the
default), a pre-defined list of VPI/VCI pairs are searched to find a valid configuration for
your ADSL line. Entering a value for the VPI or VCI setting will disable this feature.
set dmt wiringMode [ auto | tip_ring | A_A1 ]
(not supported on all models) This command configures the wiring mode setting for your
ADSL line. Selecting auto (the default) causes the Gateway to detect which pair of wires
(inner or outer pair) are in use on your phone line. Specifying tip_ring forces the inner pair
to be used; and A_A1 the outer pair.