User guide

184
show ip interfaces
Displays the IP interfaces for your Netopia Gateway.
show ip ipsec
Displays IPSec Tunnel statistics.
show ip firewall
Displays firewall statistics.
show ip routes
Displays the IP routes stored in your Netopia Gateway.
show ip state-insp
Displays whether stateful inspection is enabled on an interface or not, exposed addresses
and blocked packet statistics because of stateful inspection.
show log
Displays blocks of information from the Netopia Gateway diagnostic log. To see the entire
log, you can repeat the show log command or you can enter show log all.
show memory [all]
Displays memory usage information for your Netopia Gateway. If you include the optional
all argument, your Netopia Gateway will display a more detailed set of memory statistics.
show pppoe
Displays status information for each PPP socket, such as the socket state, service names,
and host ID values.