Manualshelf

User guide

ManualsBrandsMotorola ManualsNetwork RouterNetopia 3300
181182183184185186187188189190
183
SHELL Commands
reset wan-users [all |
ip-address
]
This function disconnects the specified WAN User to allow for other users to access the
WAN. This function is only available if the number of WAN Users is restricted and NAT is on.
Use the all parameter to disconnect all users. If you logon as Admin you can disconnect
any or all users. If you logon as User, you can only disconnect yourself.
restart [
seconds
]
Restarts your Netopia Gateway. If you include the optional
seconds
argument, your Neto-
pia Gateway will restart when the specified number of seconds have elapsed. You must
enter the complete restart command to initiate a restart.
show bridge interfaces
Displays bridge interfaces maintained by the Netopia Gateway.
show bridge table
Displays the bridging table maintained by the Netopia Gateway.
show crash
Displays the most recent crash information, if any, for your Netopia Gateway.
show dhcp server leases
Displays the DHCP leases stored in RAM by your Netopia Gateway.
show ip arp
Displays the Ethernet address resolution table stored in your Netopia Gateway.
show ip igmp
Displays the contents of the IGMP Group Address table and the IGMP Report table main-
tained by your Netopia Gateway.