User guide

182
quit
Exits the Netopia Gateway command line interface.
reset arp
Clears the Address Resolution Protocol (ARP) cache on your unit.
reset crash
Clears crash-dump information, which identifies the contents of the Netopia Gateway regis-
ters at the point of system malfunction.
reset dhcp server
Clears the DHCP lease table in the Netopia Gateway.
reset enet
Resets Ethernet statistics to zero
reset ipmap
Clears the IPMap table (NAT).
reset log
Rewinds the diagnostic log display to the top of the existing Netopia Gateway diagnostic
log. The reset log command does not clear the diagnostic log. The next show log com-
mand will display information from the beginning of the log file.
reset security-log
Clears the security monitoring log to make room to capture new entries.