User guide

177
SHELL Commands
Each test generates one of the following result codes:
download [ server_address ] [ filename ] [confirm]
This command installs a file of configuration parameters into the Netopia Gateway from a
TFTP (Trivial File Transfer Protocol) server. The TFTP server must be accessible on your
Ethernet network.
You can include one or more of the following arguments with the download command. If
you omit arguments, the console prompts you for this information.
• The server_address argument identifies the IP address of the TFTP server from
which you want to copy the Netopia Gateway configuration file.
• The filename argument identifies the path and name of the configuration file on the
TFTP server.
• If you include the optional confirm keyword, the download begins as soon as all infor-
mation is entered.
install [ server_address ] [ filename ] [confirm]
(Not supported on model 3342/3352)
Downloads a new version of the Netopia Gateway operating software from a TFTP (Trivial
File Transfer Protocol) server, validates the software image, and programs the image into
the Netopia Gateway memory. After you install new operating software, you must restart
the Netopia Gateway.
The
server_address argument identifies the IP address of the TFTP server on which
your Netopia Gateway operating software is stored. The filename argument identifies the
path and name of the operating software file on the TFTP server.
If you include the optional keyword confirm , you will not be prompted to confirm whether
or not you want to perform the operation.
CODE Description
PASS The test was successful.
FAIL The test was unsuccessful.
SKIPPED The test was skipped because a test on which it depended failed, or
because the test did not apply to your particular setup or model.
PENDING The test timed out without producing a result. Try running the test again.