User`s manual

CNFG - Configure Board Information Block
3-29
3
CNFG - Configure Board Information Block
Command Input
CNFG [;[I] [M]]
Options
Description
The CNFG command displays the configure the board information
block, and allows you to change the contents. The board
information block, which is resident within the Non-Volatile RAM
(NVRAM), contains various elements detailing specific operation
parameters of the PowerPC board. which have been set up by the
factory. The
CNFG command does not describe the elements and
their use.
The board information block contents are checksummed for
validation purposes. This checksum is the last element of the block.
Refer to the board installation and use manual for the location, and
contents of the board information block, and the size and logical
offset of each element.
The parameters that are quoted are left-justified ASCII strings
padded with space characters. The quotes are displayed to indicate
the size of the string. Parameters that are not quoted are considered
data strings, and data strings are right-justified. The data strings are
padded with zeroes if the length is not met.
The CNFG information is configured in the factory. There is no
need ever to modify these values unless the NVRAM gets
corrupted.
I Initialize the board information block to zero.
M Modify the board information block.