User`s manual

CM - Concurrent Mode NOCM - No Concurrent Mode
3-25
3
CM - Concurrent Mode
NOCM - No Concurrent Mode
Command Input
CM [[PORT] [ID-STRING] [BAUD] [PHONE-NUMBER]]|[;A]|[;H]
NOCM
Arguments
ID-STRING Device (i.e. modem) with which communications
is established before the concurrent mode session
is activated.
If no identiÞer string is speciÞed, CM will use an
identiÞer string of ÒDUMBÓ by default.
The identiÞer string must be one that is supported.
If the identiÞer string is not found in the supported
list, CM displays an error message.
BAUD Baud rate.
The baud rate must be supported by the device
and must be supported by the debugger (110, 300,
600, 1200, 2400, 4800, 9600, 19200).
If no baud rate is speciÞed, CM uses the default
baud rate for the device. This is also displayed
along with the supported devices. If the baud rate
is not supported, CM displays an error message.
PHONE-NUMBER Phone number.
This may be a string of any alphanumeric
characters. This string is passed directly to the
device driver if needed. In the case of modems, this
string is added to the dial recognition string. If the
phone number Þeld is not speciÞed, a dial-in
condition is assumed (wait for call).